Cutting Height Range
2 - 12 in. (5.1 - 30.5 cm)
2 - 12 in. (5.1 - 30.5 cm)
Weight
2,000 lb. (907.2 kg) with front and rear single chain guards
2,000 lb. (907.2 kg) with front and rear single chain guards
Height
Deck - 13 3/8 in. (34 cm) (Bottom of deck to bottom of skid shoe)
Deck - 13 3/8 in. (34 cm) (Bottom of deck to bottom of skid shoe)
Width
Overall - 90 1/2 in. (2.30 m)
Overall - 90 1/2 in. (2.30 m)
Cutting Width
84 in. (2.13 m)
84 in. (2.13 m)
Length
Overall - 130 in. (3.30 m)
Overall - 130 in. (3.30 m)
Deck Thickness
Material - 3/16 in. (5 mm)
Construction - All welded
Material - 3/16 in. (5 mm)
Construction - All welded
Blades
(2) 1/2 x 4 in. (1.3 x 10.2 cm) heat treated alloy steel free-swinging high lift - low friction
Bolts - Keyed with harden flat washers and locknuts
(2) 1/2 x 4 in. (1.3 x 10.2 cm) heat treated alloy steel free-swinging high lift - low friction
Bolts - Keyed with harden flat washers and locknuts
Skirt Thickness
Side Material - 1/4 in. (6 mm)
Side Material - 1/4 in. (6 mm)
Blade Tip Speed
14,369 fpm (73 mps)
14,369 fpm (73 mps)
Blade Type
Heat treated alloy steel, free swinging high lift - low friction
Heat treated alloy steel, free swinging high lift - low friction
Cutting Capacity
4 in. (10.2 cm) diameter
4 in. (10.2 cm) diameter
Tractor PTO Speed
540 rpm
540 rpm
Hitch
3-point
Category lI or III with floating clevis top link, Quick Hitch adaptable
3-point
Category lI or III with floating clevis top link, Quick Hitch adaptable
Driveline Protection
4 plate slip clutch
4 plate slip clutch
Drive Motor
Gearbox - 1:1.21 Speed-up beveled gears, 1 3/4 in. (4.4 cm) - 20 spline input shaft
Gearbox Oil Capacity - 10 pt. (4.73 l)
Gearbox Lubricant - 80-90W oil
Gearbox - 1:1.21 Speed-up beveled gears, 1 3/4 in. (4.4 cm) - 20 spline input shaft
Gearbox Oil Capacity - 10 pt. (4.73 l)
Gearbox Lubricant - 80-90W oil
Skid Shoes
Replaceable bolt on
Replaceable bolt on
Tailwheel
4 x 8 x 15 in. laminated tire with cast iron hub
4 x 8 x 15 in. laminated tire with cast iron hub
Output Shaft
2 3/8 in. (6 cm)
2 3/8 in. (6 cm)
Stump Jumper
3/16 in. (5 mm) Round dish shaped bolt-on stump-jumper with diamond shaped blade bar
3/16 in. (5 mm) Round dish shaped bolt-on stump-jumper with diamond shaped blade bar
Driveline -- Center
ASAE Category 5 with 4-plate slip clutch
ASAE Category 5 with 4-plate slip clutch
Tractor Size
70 - 190 hp (52.2 - 141.7 kW)
Kubota Matched - M
70 - 190 hp (52.2 - 141.7 kW)
Kubota Matched - M
Gearbox Protection
Cast iron housing
Cast iron housing