Weight
Machine - 2,540 lb. (1,152.1 kg)
Hitch - 793 lb. (359.7 kg)
Machine - 2,540 lb. (1,152.1 kg)
Hitch - 793 lb. (359.7 kg)
Height
Deck - 11 in. (27.9 cm)
Deck - 11 in. (27.9 cm)
Width
Minimum Transport - 7 ft. 11 in. (2.41 m) with front cutting blade 1 1/2 in. (3.8 cm) off the ground
Minimum Transport - 7 ft. 11 in. (2.41 m) with front cutting blade 1 1/2 in. (3.8 cm) off the ground
Cutting Width
12 ft. (3.66 m)
Overall - 12 ft. 7 in. (3.84 m)
12 ft. (3.66 m)
Overall - 12 ft. 7 in. (3.84 m)
Cutting Height
1 1/2 - 12 in. (3.8 - 30.5 cm)
1 1/2 - 12 in. (3.8 - 30.5 cm)
Length
Overall - 13 ft. 3 in. (4.04 m)
Overall - 13 ft. 3 in. (4.04 m)
Wing Flex Angle
Operating - Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground
Operating - Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground
Deck Thickness
Material - 10 ga. (3.4 mm)
Material - 10 ga. (3.4 mm)
Blades
6 (2 per deck) - 1/2 x 3 in. (1.3 x 7.6 cm) Heat treated free swinging alloy Steel with up lift
Rotation - Left Wing - Counterclockwise; Center Deck - Counterclockwise; Right Wing - Clockwise
Bolt - Keyed with hardened flat washer and locknut
6 (2 per deck) - 1/2 x 3 in. (1.3 x 7.6 cm) Heat treated free swinging alloy Steel with up lift
Rotation - Left Wing - Counterclockwise; Center Deck - Counterclockwise; Right Wing - Clockwise
Bolt - Keyed with hardened flat washer and locknut
Skirt Thickness
Side material - 3/16 in. (5 mm) plate
Side material - 3/16 in. (5 mm) plate
Blade Overlap
6 in. (15.2 cm)
6 in. (15.2 cm)
Blade Tip Speed
Center - 16,500 fpm (83.8 mps)
Wing - 16,000 fpm (81.3 mps)
Center - 16,500 fpm (83.8 mps)
Wing - 16,000 fpm (81.3 mps)
Bladeholder/Carrier
1 x 3 1/2 in. (2.5 x 8.9 cm)
1 x 3 1/2 in. (2.5 x 8.9 cm)
Blade Type
Heat treated free swinging alloy steel with up lift
Heat treated free swinging alloy steel with up lift
Cutting Capacity
1 1/2 in. (3.8 cm)
1 1/2 in. (3.8 cm)
Hitch
Pull-type
LP performance and swivel
Jack - Standard 2,000 lb. (907.2 kg)
Pull-type
LP performance and swivel
Jack - Standard 2,000 lb. (907.2 kg)
Wheels
4 Wheels - 2 on transport axle and one on each wing axle
20.5 x 6.75 x 10 in. (52.1 x 17.1 x 25.4 cm) used aircraft tires or 21 in. (53.3 cm) laminated wheels
Hubs - Cast iron 5-bolt with tapered roller bearings and 1 3/4 in. (4.4 cm) shafts
4 Wheels - 2 on transport axle and one on each wing axle
20.5 x 6.75 x 10 in. (52.1 x 17.1 x 25.4 cm) used aircraft tires or 21 in. (53.3 cm) laminated wheels
Hubs - Cast iron 5-bolt with tapered roller bearings and 1 3/4 in. (4.4 cm) shafts
Safety Features
Wing Transport Protection - Wing transport locks
Front and Rear Guards - Single Chain
Wing Transport Protection - Wing transport locks
Front and Rear Guards - Single Chain
Input Drive Line
Category 4 with constant velocity u-joint
Category 4 with constant velocity u-joint
Drive Motor
Gearbox Shaft - Input - 1 3/8 in. (3.5 cm) 6 spline
Gearbox capacity and Lubrication - Splitter - 4.5 pt. (2.13 l) of gear lube 80-90W EP; Center and Wings - 4 pt. (1.89 l) of gear lube 80-90W EP
Gearbox Shaft - Input - 1 3/8 in. (3.5 cm) 6 spline
Gearbox capacity and Lubrication - Splitter - 4.5 pt. (2.13 l) of gear lube 80-90W EP; Center and Wings - 4 pt. (1.89 l) of gear lube 80-90W EP
Driveline -- Wing
Category 3 with slip-clutch
Category 3 with slip-clutch
Skid Shoes
Wing Deck - 1 replaceable per wing
Center Deck - 2 replaceable shoes
Wing Deck - 1 replaceable per wing
Center Deck - 2 replaceable shoes
Output Shaft
Gearbox - 1 1/2 in. (3.8 cm)
Gearbox - 1 1/2 in. (3.8 cm)
Stump Jumper
10 ga. (3.4 mm) round dish shaped pan, reinforced
10 ga. (3.4 mm) round dish shaped pan, reinforced
Tractor Size
40 - 100 hp (30 - 75 kW)
Kubota Matched - L / MX / M
40 - 100 hp (30 - 75 kW)
Kubota Matched - L / MX / M
Gearbox HP Rating
Splitter - 160 hp (119 kW)
Center and wings - 100 hp (75 kW)
Splitter - 160 hp (119 kW)
Center and wings - 100 hp (75 kW)