Width
Transport - 9 ft. - 6 in. (2.9 m) with lock bar installed
Transport - 9 ft. - 6 in. (2.9 m) with lock bar installed
Cutting Capacity
2 mph (3.2 km/h) = 5.27 acres / hr.
4 mph (6.4 km/h) = 10.54 acres / hr.
6 mph (9.7 km/h) = 15.82 acres / hr.
2 mph (3.2 km/h) = 5.27 acres / hr.
4 mph (6.4 km/h) = 10.54 acres / hr.
6 mph (9.7 km/h) = 15.82 acres / hr.
Overall Length
Mowing Position - 18 ft. - 6 in. (5.64 m)
Transport Position - 15 ft. - 2 in. (4.62 m)
Mowing Position - 18 ft. - 6 in. (5.64 m)
Transport Position - 15 ft. - 2 in. (4.62 m)
Cutting Width
21 ft. - 9 in. (6.63 m)
21 ft. - 9 in. (6.63 m)
Height
Transport - 11 ft. - 2 in. (3.40 m)
Transport - 11 ft. - 2 in. (3.40 m)
Cutting Height
3/4 - 5 1/4 in. (19 - 133 mm) In 1/4 in. (6 mm) increments
3/4 - 5 1/4 in. (19 - 133 mm) In 1/4 in. (6 mm) increments
Overall Width
22 ft. (6.71 m)
22 ft. (6.71 m)
Weight
4,150 lb. (1,882.4 kg)
4,150 lb. (1,882.4 kg)
Cutting Angle
Wing Flex - 23° left to right, 22° front to back
Center Deck Flex - 10° left to right, 22° front to back
Wing Flex - 23° left to right, 22° front to back
Center Deck Flex - 10° left to right, 22° front to back
Tires
Deck - 18 x 9.5 Air Tire, Sealant
Deck Wheel Spindles - 1 1/4 in. with nylon bushings
Transport - 2 each, P27560SR
Deck - 18 x 9.5 Air Tire, Sealant
Deck Wheel Spindles - 1 1/4 in. with nylon bushings
Transport - 2 each, P27560SR
Blade Size
5/16 x 2 1/2 x 31 17/32 in.
5/16 x 2 1/2 x 31 17/32 in.
Number of Blades
3 (each per deck)
3 (each per deck)
Tractor Requirements
65-100 hp
Kubota Matched - L / MX / M
65-100 hp
Kubota Matched - L / MX / M
Drive
Main Driveline - Category lV with constant velocity
Gearbox Support - 1/4 in. (6 mm) Steel Channel
Gearboxes - 540 rpm
Main Driveline - Category lV with constant velocity
Gearbox Support - 1/4 in. (6 mm) Steel Channel
Gearboxes - 540 rpm
Blade Spindles
Speed - 2,241 rpm
Speed - 2,241 rpm
Anti-Scalp Roller
Front center of each deck
Front center of each deck
Hitch
Pull type with adjustable clevis and safety tow chain
Pull type with adjustable clevis and safety tow chain
Blade Tip Speed
18,498 fpm (94 mps)
18,498 fpm (94 mps)
Deck Thickness
3/16 in. (5 mm)
3/16 in. (5 mm)
Drive Belt Tension
Spring loaded idler with overcenter release
Spring loaded idler with overcenter release
Gauge Wheels
Arms - 1/4 in. (6 mm) wall square tubing
Arms - 1/4 in. (6 mm) wall square tubing
Deck Frame
Deck Drivelines - Category III with slip clutch
Deck Size and Quantity - 3 each @ 90 in. (1.52 m)
Overlap - 4 1/2 in. (11.4 cm)
Deck Drivelines - Category III with slip clutch
Deck Size and Quantity - 3 each @ 90 in. (1.52 m)
Overlap - 4 1/2 in. (11.4 cm)
Blades
Low lift
Drive Belt - 1 C-section
Bearing - Sealed ball
Low lift
Drive Belt - 1 C-section
Bearing - Sealed ball
Wheel Arm Pivot Shaft
1/4 in. wall square tubing
1/4 in. wall square tubing
Blade Overlap
2 1/4 in. (5.7 cm)
2 1/4 in. (5.7 cm)