Tractor Hitch
Skid steer type quick attach that meets SAE
Skid steer type quick attach that meets SAE
Output Shaft
2 in. hex or 2-9/16 in. round shaft
2 in. hex or 2-9/16 in. round shaft
Torque
Output - 2,732 ft. lb. (3,703.5 Nm) based on 3,000 psi (20.68 MPa) @20 gpm (75.7 lpm)
Output - 2,732 ft. lb. (3,703.5 Nm) based on 3,000 psi (20.68 MPa) @20 gpm (75.7 lpm)
Drive Type
Hydraulic Motor - 18.9 CID
Gearbox - Hydraulically driven planetary gearbox, reversible
Hydraulic Motor - 18.9 CID
Gearbox - Hydraulically driven planetary gearbox, reversible
Auger
Length - 9 in.
Size - 49 in. (1.24 m)
All other auger sizes - 50 3/4 in. (1.29 m)
Flighting Thickness 5/16 in. (8 mm)
Pipe - 2 1/2 in. (6.4 cm) ID
Teeth - Forged, Individually Replaceable. 40 Degree angle installed on flat side and 50 degree angle installed on angled side
Length - 9 in.
Size - 49 in. (1.24 m)
All other auger sizes - 50 3/4 in. (1.29 m)
Flighting Thickness 5/16 in. (8 mm)
Pipe - 2 1/2 in. (6.4 cm) ID
Teeth - Forged, Individually Replaceable. 40 Degree angle installed on flat side and 50 degree angle installed on angled side
Tractor Size
Kubota Matched - SSV / SVL
Kubota Matched - SSV / SVL
Hydraulic Flow
Requirements - 10-30 gpm (37.9-113.6 lpm) @1,500-3,500 psi (10.34-24.13 MPa)
Requirements - 10-30 gpm (37.9-113.6 lpm) @1,500-3,500 psi (10.34-24.13 MPa)